FUJITSU 364 (COMMANDER IIX) and 170 portable

                NAM Type:  EEPROM
            Manufacturer:  Fujitsu
              Programmer:  Handset
          ESN Prefix DEC:  133
                     HEX:  85
 ESN, S/N Match Required:  Yes (manufacturer prefix + last 4 or 5 digits)
    Programmable Handset:  Yes
      Available Channels:  832

    Programming Sequence:  Power On
                           F + LOCK
                           Power Off
                           Power On
                           # + 626 + # + 7764726 (within 10 seconds)
                           Hold * key until tone stops
                           Enter data for each step then press STOR
                           Press SEND to write data

                       # of digits
        System ID Format:  5    XXXXX
        Local Use Option:  1    1
              MIN Option:  1    1
           Mobile Number:  10   XXX-XXX-XXXX
           Station Class:  2    08 (mobile) 14 (portable)
  Initial Paging Channel:  3     333 or 334
   Access Overload Class:  2    XX
        Preferred System:  1    1 (A) or 0 (B)
         Group ID Format:  2    XX
                    Lock:  3 or 4
              Call Timer:  1    4
               Auto Lock:  1    1
        Call Restriction:  1    1

Call Timer - 1  Timer Off
             2  6-seconds
             3  30-seconds
             4  60-seconds

Auto Lock - 1  Manual lock, no out
            2  Manual lock, no calls
            3  Auto lock, no out
            4  Auto lock, no calls

Call Restriction - 1  No restriction
                   2  No memory dialing
                   3  No long-distance
                   4  Both 2 and 3
                   5  memory calls only

Programming steps for NAMs 2 thru 4: Power On
                                     Unlock phone (if locked)
                                     F + 7 + (NAM 2, 3 or 4)
                                     F + LOCK
                                     Power Off
                                     Power On
                                     Follow programming code and steps from
                                      top

   Horn alert (364 only):  F + #/AUX
         New Unlock Code:  NAM
           System Select:  F + 1 + X
                            X=1 AB Pref A
                            X=2 BA Pref B
                            X=3 A Only
                            X=4 B Only
                            X=5 Home

To confirm setting, press RCL + F + X