Pro-60  (200-0309)           Care and Maintenance      Faxback Doc. # 15357

The Radio Shack PRO-60 Programming Scanner is an example of superior design
and craftsmanship.  The following suggestions will help you care for your
scanner so you can enjoy it for years.

    Keep the scanner dry.  If it gets wet, wipe it dry immediately.
    Liquids can contain minerals that can corrode the electronic circuits.

    Use only fresh batteries of the required size and type.  Always remove
    old or weak batteries.  They can leak chemicals that destroy electronic
    circuits.

    Handle the scanner gently and carefully.  Dropping it can damage
    circuit boards and cases and can cause the scanner to work improperly.

    Use and store the scanner only in normal temperature environments.
    Temperature extremes can shorten the life of electronic devices,
    damage batteries, and distort or melt plastic parts.

    Keep the scanner away from dust and dirt, which can cause premature
    wear of parts.

    Wipe the scanner with a damp cloth occasionally to keep it looking new.
    Do not use a harsh chemicals, cleaning solvents, or strong detergents
    to clean the scanner.

Modifying or tampering with your scanner's internal components can cause a
malfunction and might invalidate the scanner's warranty and void your FCC
authorization to operate it.  If your scanner is not operating as it
should, take it to your local Radio Shack store for assistance.


(LB/all-05/24/95)

Privacy Policy