PRO-2035 1000-Channel Programmable Home Scanner
(200-0460) Troubleshooting Faxback Doc. # 16917
If the scanner is not working as it should, these suggestions might help
you eliminate the problem. If the scanner still does not operate normally,
take it to your local Radio Shack store for assistance.
Symptom Suggestion
Scanner is on, but will not scan. Be sure SQUELCH is adjusted
properly.
Scanner receives stations poorly Check the antenna (indoor
or not at all. or outdoor).
Signals may be blocked from
being received by the
scanner due to metal frames
or material in building.
Change the scanner's and
try again.
Be sure frequencies are
programmed properly and set
with the correct mode (AM,
NFM, or WFM).
Scanner's keys or display work The scanner's processor may
poorly or not at all. be locked. Restart the
scanner. See "Restarting/
Resetting the Scanner."
Scanner does not work at all. Check the AC power cord and
outlet.
The scanner may require a
reset. See "Restarting/
Resetting the Scanner."
Scanner locks on frequencies that Be sure birdie frequencies
have an unclear transmission. are not programmed, or
listen to birdie
frequencies manually. See
"Birdie Frequencies" in
"Guide to Frequencies."
Privacy Policy