PRO-2042 Programmable Scanner
(200-0464)                 Troubleshooting            Faxback Doc. # 31537

If your scanner is not working as it should, these suggestions might help
you eliminate the problem.  If the scanner still does not operate normally,
take it to your local Radio Shack store for assistance.

Problem                                     Suggestion

Scanner is on, but will not scan.       Be sure SQUELCH is adjusted
                                        properly.

Scanner receives stations poorly        Check the antenna (indoor or
or not all.                             outdoor).

                                        Signals may be blocked from being
                                        received by the scanner due to
                                        metal frames or material in the
                                        building.  Change the scanner's
                                        location and try again.

                                        Be sure frequencies are programmed
                                        properly and set with the correct
                                        mode (AM, NFM, or WFM).

Scanner's keys or display work          The scanner's processor might be
poorly or not at all.                   locked.  Restart the scanner.  See
                                        "Restarting/Resetting the Scanner"
                                        on Faxback Doc. #31533.

Scanner does not work at all.           Check the AC power cord and outlet.

Scanner locks on frequencies that       Be sure birdie frequencies are not
have an unclear transmission.           programmed, or listen to birdie
                                        frequencies manually.  See "Birdie
                                        Frequencies" on Faxback Doc.
                                        # 31535.


(EB 3/25/96)

Privacy Policy