PRO-2045 200-Channel Weather Alert Home Scanner
(200-0418)                 Keyboard                   Faxback Doc. # 33683

UNDERSTANDING YOUR SCANNER / A LOOK AT THE KEYBOARD

A quick glance at this section should help you understand each key's
function(s).

        VOLUME - rotate to turn the scanner on or off and adjust the volume.

       SQUELCH - rotate to adjust the squelch.

          AUTO - lets you automatically program frequencies into banks; 
                 sets the scanner to scan banks from the lowest to the 
                 highest frequency.

  H/S-PRIORITY - sets and turns on and off priority for a particular
                 channel; turns on and off Hypersearch.

        REVIEW - lets you review locked-out channels or search skip memory.

      TRANSFER - transfers the contents of a channel to an empty or desired
                 channel, or exchanges the contents of two channels.

          MODE - selects the modulation mode (AM and FM) function.

          DATA - turns on or off data skip.

           ATT - turns on or off the attenuator to let you limit reception 
                 to strong, local transmitters.

         ALERT - sets the scanner to the weather alert mode.

         COUNT - sets the scanner to display the number of times the scanner
                 detected a transmission on a channel since you turned the
                 scanner on.

         CTCSS - lets you use the optional CTCSS mode if you installed a 
                 CTCSS tone board.

            WX - starts scanning the weather frequencies.

         LIMIT - starts a limit search.

         CLEAR - clears an incorrect entry.

   Number Keys - each key has a single digit with a range of numbers printed 
                 above it.  The single digits are used to enter the number 
                 of a channel or frequency.  The range of numbers (21-40, 
                 for example) indicates the channels that make up a memory 
                 bank.  See "Understanding Channel-Storage Banks" on Faxback 
                 Doc. # 33684.

             . - enters a decimal point when you set a frequency.

             E - enters the frequency when you program channels.

     /\ and \/ - select the search direction.

          SCAN - scans through programmed channels.

        MANUAL - stops scanning and lets you directly enter a channel number

       PROGRAM - programs frequencies into channels.

       MONITOR - accesses the 10 monitor memories.  See "Moving a Frequency 
                 from a Monitor Memory to a Channel" on Faxback Doc. # 33693

         DELAY - programs a 2-second delay for the selected channel and 
                 turns on or off the delay during a limit or direct search 
                 or weather scan.

   LOCKOUT-S/S - lets you lock out a selected channel, or skip a specified
                 frequency during a limit or direct search.

FREQ/CHAN-LOCK - selects the rotary tuner's mode - frequency tuning, channel
                 tuning, or locked.

  Rotary Tuner - turn to tune through channels or frequencies.  Turn the 
                 rotary tuner faster to increase the tuning speed.

(BR/EB 6/20/96)

Privacy Policy