PRO-2025 16-Channel Direct Entry Programmable Scanner
(200-0146)                   Operation                Faxback Doc. # 34049


PROGRAMMING CHANNELS

1.  Turn on  your scanner by turning the volume clockwise.

2.  The scanner might strart scanning.  If so, press MANUAL to stop the
    scanning.

3.  Enter the channel number that you want to program and press MANUAL.

4.  Enter a frequency including the decimal point. The decimal point shows
    up on the display as a -- (dash).

5.  Press Enter to store the frequency.

6.  To confirm the proper entry, press REVIEW.  The programmed frequency
    appears on the display one digit at a time.

7.  To program more channels repeat steps 3-4.


(IR-07/29/96)

Privacy Policy