PRO-37 Programmable Scanner
(200-0138)                 Care and Maintenance       Faxback Doc. # 46276

Your PRO-37 Programmable Scanner is an example of superior design and
craftsmanship.  The following suggestions will help you care for your
scanner so that you can enjoy it for years.

   Keep the scanner dry.  If it does get wet, wipe it dry immediately.
   Liquids can contain minerals that can corrode the electronic circuits.

   Use only fresh batteries of the recommended size and type.  Always
   remove old or weak batteries.  They can leak chemicals that destroy
   electronic circuits.

   Handle the scanner gently and carefully.  Dropping it can damage
   circuit boards and cases and can cause the scanner to work improperly.

   Use and store the scanner only in normal temperature environments.
   Temperature extremes can shorten the life of electronic devices, damage
   batteries, and distort or melt plastic parts.

   Keep the scanner away from dust and dirt, which can cause premature
   wear of parts.

   Wipe the scanner with a dampened cloth occasionally to keep it looking
   new.  Do not use harsh chemicals, cleaning solvents, or strong
   detergents to clean the scanner.

Modifying or tampering with your scanner's internal components can
invalidate the scanner's warranty and might void your FCC authorization to
operate it. If your scanner is not operating as it should, take it to your
local RadioShack store.  Our personnel can assist you and arrange for
service, if needed.

(br/EB 1/14/98)