PRO-2043 30-Channel Direct Entry Programmable Scanner
(200-0415) Troubleshooting Faxback Doc. # 47685
If your scanner is not working as it should, these suggestions might help
you eliminate the problem. If the scanner still does not operate properly,
take it to your local RadioShack store for assistance.
SYMPTOM SUGGESTION
Scanner is on, but will not scan. Be sure SQUELCH is adjusted
properly. See "Turning On the
Scanner/Setting Volume and Squelch"
in Faxback Doc. # 38419.
Scanner receives stations poorly Check the antenna (indoor or
or not at all. outdoor).
Signals may be blocked from being
received by the scanner due to
metal frames or material in the
building. Change the scanner's
location and try again.
The scanner's keys do not work. The scanner might be locked. Reset
the scanner. See "Resetting the
The display shows random segments. Scanner" in Faxback Doc. # 38419.
Scanner does not work at all. Check that the power supply is
working.
The scanner might be locked. Reset
the scanner. See "Resetting the
Scanner" in Faxback Doc. # 38419.
Scanner locks on frequencies that Be sure SQUELCH is adjusted
have an unclear transmission. properly. See "Turning On the
Scanner/Setting Volume and Squelch"
in Faxback Doc. # 38419.
Be sure birdie frequencies are not
programmed, or listen to birdie
frequencies manually. See "Birdie
Frequencies" in Faxback Doc. # 17653
(LB/eb 5/15/98)
Privacy Policy