PRO-32 Portable Scanner/Receiver
(200-0133)                 Care and Maintenance       Faxback Doc. # 50772

Your PRO-32 represents a fine example of electronic engineering and
construction.  As such, it should be treated accordingly.  We offer the
following suggestions so you will enjoy this product for many years to
come.

If at anytime you suspect that your unit is not performing as it should,
stop by your local RadioShack store.  Our personnel are there to assist
you and arrange for service, if needed.

  Keep it dry.  If water should get on it, wipe it off immediately.  Water
  contains minerals that can corrode electronic circuits.

  Do not store in hot areas.  High temperatures can shorten the life of
  electronic devices, damage batteries, and can even distort or melt
  certain plastics.

  Do not drop your product. This will likely result in failure to operate.
  Circuit boards can crack and cases may not survive the impact.  Handling
  your product roughly will shorten its useful life.

  Do not use or store in areas of high levels of dirt or dust.  The
  electronics may be contaminated. Any moving parts will wear prematurely.

  Do not use harsh chemicals, cleaning solvents or strong detergents to
  keep your unit looking new.  You need only wipe it with a dampened cloth
  from time to time.

Always make sure any batteries used are fresh and are of the correct type.
Never use general purpose batteries if alkaline cells are called for.  Old
or almost dead batteries are also dangerous.  A worn out battery can leak
chemicals which will destroy electronic circuits.

(EB 12/32/98)