Pro-2032 Desk-Top Programmable Scanner
(200-0409)                 Special Features           Faxback Doc. # 63746

Delay

Many agencies use a two-way radio system that might have a pause of 
several seconds between a query and a reply.  To program a delay into that 
channel to keep from missing a reply, select the channel and press DELAY 
so DELAY appears on the display.  The scanner pauses for two seconds on a 
channel programmed with a delay.

When your scanner pauses at an active channel which has been programmed 
with a delay, it waits for two seconds after the completion of each 
transmission on that channel before it resumes scanning.

Scanning and Search Speeds

Your PRO-2032 has 2 different scanning speeds:

  8 channels per second.

  25 channels per second (Hyperscan)

It also has 2 different search speeds:

  8 steps per second

  50 steps per second (Hyperscan)

While you are in the scan mode, press SPEED to select the scanning speed.  
While you are in the search mode, press SPEED to select the search speed.

Whenever the unit is turned on, the speed is automatically set to high.

Locking Out Channels

You can increase the effective scanning speed by locking out specific 
channels that you have not yet programmed.  To do so, manually select the 
empty channel and press LOCK OUT so LOCK-OUT appears on the display.  This 
is also handy for locking out channels you have programmed that have a 
continuous transmission.  You can still manually select locked out 
channels.

To unlock a channel, manually select the channel and press LOCK OUT so 
LOCK-OUT disappears from the display.

Note: There must be at least one active channel in each bank.  You cannot
      lock out all channels.

Turning Channel-Storage Banks On and Off

You can turn each channel-storage bank on and off.  When you turn off a 
bank, the scanner does not scan any of the 20 channels in the bank.

While scanning, press the number key corresponding to the bank you want to 
turn on or off.  If the memory bank indicator is on, the bank is turned on 
and the scanner scans all channels within that bank that are not locked 
out.  If the indicator is off, the scanner does not scan any of the 
channels within that bank.

You can manually select any channel in a bank, even if the bank is turned 
off.  You cannot turn off all banks.  One bank is always active.

Priority

You can scan through the programmed channels and still not miss an 
important or interesting call on a specific channel.  To program a stored 
channel as the priority channel, press PROGRAM, the desired channel 
number, and then PRIORITY.  You can only select one channel as the 
priority channel.

To turn on the priority feature, press PRIORITY during scanning.  Priority 
appears on the display.  The scanner now checks the priority channel every 
two seconds, and stays on the channel if there is activity.  P appears to 
the left of the display whenever the scanner is set to the priority 
channel.

To turn off the priority feature, press PRIORITY until PRIORITY disappears 
from the display.

Manually Selecting a Channel

You can continuously monitor a specific channel without scanning.  This is 
useful if you hear an emergency broadcast on a channel and do not want to 
miss any details - even though there might be periods of silence - or if 
you want to monitor only a locked-out channel.

To select a channel, just press MANUAL.  Enter the channel number, and 
press MANUAL again.  Or, if the scanner is scanning and stops at the 
desired channel, just press MANUAL one time.  Pressing MANUAL additional 
times makes the scanner step through the channels.

(EB 1/8/1)

Privacy Policy