PRO-94 Tutorial: Direct Search

This tutorial covers running a direct search on your PRO-94. A direct search lets you search up or down from the currently displayed frequency. -d- appears during searching until the scanner stops.

For additional information on this product, see the links below:

Step 1: Enter Direct Search Mode



Press MAN. MAN appears in the display. You can either choose to enter a frequency to search from (Steps 2-4, next) or search from a specific channel (Steps 5-7).


Step 2: Search from a Specific Frequency



Enter the frequency you want to start from using the number keys (0-9). Press MON/CLR (.) to enter a decimal point.

Click Here for the Police Call Frequency Lists on CD


Step 3: If You Receive An Error Message...



If you enter an invalid frequency, the scanner displays *Error.* Press MON/CLR (.) and return to Step 2 to re-enter the frequency or enter a new frequency.


Step 4: Search for Frequencies



Press the DOWN arrow to search down or the UP arrow to search up from the selected frequency. -d-, SEARCH, and an UP or DOWN arrow appear. Go to Step 8 for information on listening to and storing frequencies.


Step 5: Search from a Stored Frequency



To start the search from a frequency already stored in one of your scanner's channels, press MAN or PROG.


Step 6: Enter the Channel Number



Use the number keys (0-9) to enter the channel number, then press MAN or PROG again.


Step 7: Search for Frequencies



The frequency in that channel appears on the display. Press the DOWN arrow to search down or the UP arrow to search up from the selected frequency. -d-, SEARCH, and an UP or DOWN arrow appear.


Step 8: Stop on a Frequency



When the scanner stops on a transmission you want to listen to, quickly press HOLD. HOLD appears on the display.


Step 9: Store the Frequency in Monitor Memory



Press MON/CLR (.) to store the display frequency into the current monitor memory. The scanner remains in HOLD mode.


Step 10: Search for Additional Frequencies



Press HOLD (A/B) or either the UP or DOWN arrow keys for at least 1 second to continue searching. If you didn't press MON/CLR (.), simply press the UP or DOWN arrow keys to continue searching.


Step 11: Exit Direct Search Mode



Press MAN to exit search mode. MAN appears on the display.