| |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The
Optotrakker is a communications decoder that when interfaced
to a computer, will quickly and easily turn a number of receivers
into a trunked radio tracking receiver. The Optotrakker can
also interface to virtually any receiver for the decoding
of CTCSS, DCS, LTR, Motorola Type I and II, and DTMF, in a
non-PC application by displaying data on its two line LCD
display.
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
TrakkStar
main scanning screen.
Click image for full size view
(149k image)
|
|
|
|
|
|
|
|
|
|
Have
more questions?
Visit the FAQ
page! |
|
|
|
|
|
|
|
|
|
|
|
|
WHAT
CAN THE OPTOTRAKKER DO FOR YOU ?
The
Optotrakker used with the supplied TrakkStar Windows software,
is the first and only product that can scan multiple types
of trunking systems on any frequency band at the same time.
The Optotrakker allows you to now scan Motorola 400MHz, 500MHz,
800MHz systems, as well as the 900MHz systems, simultaneously
with rapid speed and data capabilities. Using an exclusive
pass through technology, interfacing with future receivers
will be easy as the Optotrakker requires the use of only one
com port. Supports ICOM R7000, R7100, R8500, R9000, R10, AOR
AR8000, and AR5000.
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
Decodes
CTCSS, DCS, LTR, DTMF and Motorola talk group ID's
-
Scan
multiple trunked systems simultaneously
-
All
trunked frequency bands supported, including 400MHz, 500MHz,
800MHz, and 900MHz
-
Interfaces
to virtually any receiver when not under computer control
-
Supplied
with TrakkStar
Windows trunk decoding software
-
Built-in
Data Slicer for decoding of FSK programs
-
Two
Line LCD display
-
Interface
cables supplied with OptoTrakker
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TrakkStar
Tutorial: PDF format 31 KB
This is the original Trakkstar tutorial, redone correctly.
To view online, left click the link above. To download it
for offline viewing, right click the link, and select Save
Target As... or Save Link As...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TrakkStar
Tutorial: PDF format 2,357 KB
Note: This document is very large - it is recommended
that you download it before viewing. You may do so
by right-clicking the link, and selecting Save Target As...
or Save Link As...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
| Function |
Track
Motorola talk group ID's, Decode CTCSS, DCS, LTR, and
DTMF |
| Display |
2
x 16 character LCD w/EL backlight |
| Controls |
Power/Mode,
Up, Down |
| Inputs |
Audio
In: 3.5mm stereo phone jack, 400KOhm input impedance
Data
Connection: 3.5mm mono phone jack, 2-CI-5 protocol,
2-RS232, Full Duplex TTL, 1- FFC
|
| Power |
7
- 15VDC |
| Size |
1.8"
high x 4.5" wide x 4" deep |
|
|
|
|
|
|
*Discriminator
audio audio modification to receiver may be required.* |
|
|
|
|
|
|
|
|
Software
Requirements:
Windows 95 or 98, (Windows 3.11 not
supported)
IBM PC compatible, 486/586,
VGA display, mouse and hard drive.
Minimum RAM: 8 megabytes.
One serial port required. |
|
|
