 PRO-TURBO - THE NEW WINDOWS PROGRAM FOR THE 
CE-232 AND HB-232 SCANNER/COMPUTER INTERFACES
=============================================

The HB-232 was introduced in late 1993 and was
upgraded to the CE-232 a year or so  later.
Both are much the same, with the CE-232 just
a better designed PC board for easier access
to subtle and hidden features. The electronic
circuits and software are identical.

Both the HB-232 and CE-232 ran under the same
old MS-DOS program that is still shipped with
each interface today. 

There is nothing wrong with that old DOS program, 
and it even runs fine under Windows 3.1/95/98.  
But now comes Pro-Turbo to sweeten the pot....
....immensely!

Pro-Turbo takes up where the old MS-DOS program
leaves off.  First, there is its Windows design
for stability and compatibility.

The MS-DOS program works well across a wide range
of computers and environments, but there are
exceptions; odd little problems in weird cases.

Pro-Turbo is more universal and more compatible,
especially with the modern breed of computers,
from the 486DX2/66 and up. Pro-Turbo is the
next evolutionary step for the HB/CE-232.

Pro-Turbo adds new features and refines many of
the older ones. Just as one example, PT supports
COM1-4, where the MS-DOS program supports only
COM1 and COM2.  Pro-Turbo was written in Visual
Basic 5.0 where as the MS-DOS program was done
under QuickBasic 4.5.

Pro-Turbo is fast, efficient and consumes roughly
5% of the CPU resources of a modern PC. That means
you can easily multitask other programs at the
same time.

Following is a summary of the new and exciting
features and specifications of Pro-Turbo:

+ Windows 95/98/NT4 compatible 32-bit program

+ All the features of the original DOS HB/CE-232 
   program including scripting

+ Search and Store into scanner channels and files 
   on hard-drive

+ Fully supports the HB/CE-232 previously unsupported
   8-channel, 8-bit Analogue/Digital converters.
   Pro-Turbo offers a visual meter for each A/D channel
   And, the A/D data is AutoLoggable!

+ S-Meter and Center-Tune Meter capable using two
   of the eight A/D channels; this leave six spare 
   A/D channels for your miscellaneous needs!  
   Remember, Pro-Turbo has a Meter for each channel!

+ Audio recording to WAV files in 3 modes
   - Immediate without logging
   - 20 minute tape loop with logging
   - Recording with logging

+ Audio playback by frequency

+ User buttons for storing favorite frequencies 
   and scan banks

+ Tool buttons with functions to replace often 
   used scripts

+ MANUAL : 1 : MANUAL function or  MANUAL BACK 1 CHAN 
   function is only one click

+ AutoProgram with many enhanced features, including 
   L/O zeros, Fill a Block with/0's, lots more!

+ Extended Memory block switching using the standard
   User Switches of your interface

+ One-key restore of your preferred scan banks

+ Scripting functions to cover audio recording and A/D

+ Supports TrunkTracking (automated following of
   trunked radio system signals).


Minimum System Requirements       Ideal System Components
===========================       =============================
SVGA monitor at 800x600           SVGA at 1024x768 or better
486DX2/66 MHz CPU                 Pentium P100 CPU or better
Windows 95, 98 or NT4             Windows NT4
Mouse or other pointing device    PS2 mouse or pointing device
Sound not required                SB16 or compatible sound card
PRO-2004/5/6 scanner          
HB/CE232 Interface from          
   COMMtronics Engineering

                Get your copy of Pro-Turbo today!
                =================================
To receive Pro-Turbo on 1.44 M floppies with printed documentation
send check or M.O. for US$50 + $15 shipping and handling to:

Paul E. Turton
RR#3
Wainfleet, Ontario Canada L0S 1V0
E-Mail:  pturton@iaw.on.ca  or  jabba@iaw.on.ca
   Web:  http://www.iaw.on.ca/~jabba/pro-turbo.htm

Visit the Web site and download a fully functional time limited 
demo of Pro-Turbo with documentation.

Special Discout Coupon available to new purchasers of the CE-232!

