Goy_Wonder
September 13th, 2005, 09:16 PM
I take long showers, mainly because I move slow in the mornings. While I am showering and fiddling around with shampoo bottles & other hygiene products, it disturbs me that the water keeps flowing out of the showerhead and down the drain. This is a waste of money on the wasted water and the natural gas used to heat it. I believe in being as frugal as possible. That is, I prefer to keep my money in my account and out of the Water/ Utility company's account.
Anyway, I envisioned a device that I could attach to my showerhead that would allow me to shut-off the water at the head intermittently throughout the shower. After an internet search, I discovered that this device had already been invented. It's called a "shower cut-off valve". Do an internet search if you are interested. Actually, I only found one company on the net selling it for $9.99 and with delivery, it was around $15.00. I do not want to promote any particular company, because I don't actually know who owns the company. I could not find this device at my local hardware store.
This device is screwed on to the shower arm and then the showerhead of your choice is screwed on to the cut-off valve. You have to use plumber's tape (teflon) for those of you that have never done any plumbing. It has a simple knob that turns the showerhead on and off. It is chrome and should match any existing showerhead. An alternative to this method would be to turn off the water at the hot/cold handles. The problem with this is 1) Having to readjust the temperature every time 2) Bending over can strain your back 3) It takes more time and effort.
I have already noticed a significant change in the amount of natural gas I use per month, after using it for about 10 days. I received my first electric bill reflecting 10 days of use of the apparatus. Instead of using 20 cubic feet of gas (the prior month), I used only 17 cubic feet. This is a summer month and I only use gas for heating water and drying my clothes. I'd say there is a less significant savings on the water bill. It is estimated that a showerhead puts out from 5-8 gallons a minute. I timed it, and I have the water off during my shower for 2+ minutes. I have noticed a slight ncrease of flow out of the tub faucet, but overall, the cut-off valve significantly cuts down the hot water consumption. Basically, I rinse myself, turn off showerhead, shampoo, lather, turn on showerhead, rinse, turn off showerhead, condition, lather more, turn on, rinse.
Conservation as an environmentally friendly act is another bonus to using this device. I'm calculating that it will take about 4 months for the device to pay for itself.
Besides, I bet you all have heard about the enormous increases in the price of natural gas expected this winter.
Please read one example:
http://www.wishtv.com/Global/story.asp?S=3843868&nav=0Ra7eT0y
Natural gas costs are expected to increase by as much as 60 percent this winter, according to the Indiana Energy Association. The increase isn't only because of Hurricane Katrina.
Anyway, I envisioned a device that I could attach to my showerhead that would allow me to shut-off the water at the head intermittently throughout the shower. After an internet search, I discovered that this device had already been invented. It's called a "shower cut-off valve". Do an internet search if you are interested. Actually, I only found one company on the net selling it for $9.99 and with delivery, it was around $15.00. I do not want to promote any particular company, because I don't actually know who owns the company. I could not find this device at my local hardware store.
This device is screwed on to the shower arm and then the showerhead of your choice is screwed on to the cut-off valve. You have to use plumber's tape (teflon) for those of you that have never done any plumbing. It has a simple knob that turns the showerhead on and off. It is chrome and should match any existing showerhead. An alternative to this method would be to turn off the water at the hot/cold handles. The problem with this is 1) Having to readjust the temperature every time 2) Bending over can strain your back 3) It takes more time and effort.
I have already noticed a significant change in the amount of natural gas I use per month, after using it for about 10 days. I received my first electric bill reflecting 10 days of use of the apparatus. Instead of using 20 cubic feet of gas (the prior month), I used only 17 cubic feet. This is a summer month and I only use gas for heating water and drying my clothes. I'd say there is a less significant savings on the water bill. It is estimated that a showerhead puts out from 5-8 gallons a minute. I timed it, and I have the water off during my shower for 2+ minutes. I have noticed a slight ncrease of flow out of the tub faucet, but overall, the cut-off valve significantly cuts down the hot water consumption. Basically, I rinse myself, turn off showerhead, shampoo, lather, turn on showerhead, rinse, turn off showerhead, condition, lather more, turn on, rinse.
Conservation as an environmentally friendly act is another bonus to using this device. I'm calculating that it will take about 4 months for the device to pay for itself.
Besides, I bet you all have heard about the enormous increases in the price of natural gas expected this winter.
Please read one example:
http://www.wishtv.com/Global/story.asp?S=3843868&nav=0Ra7eT0y
Natural gas costs are expected to increase by as much as 60 percent this winter, according to the Indiana Energy Association. The increase isn't only because of Hurricane Katrina.