Hi
its me agian dipeshrestha

recently i had got chance to read the article about the icedump and i had download it from icedump site. i unpack it and copy in my system.

i added one line "c:\numega\iced\icedump.exe" right after the line "c:\numega\winice.exe" . i am asumming that the ice dump will load after softice loaded. but to my horror it doesnt load i have to run it again manually.


i dont know whats the problem please help me.

dipeshrestha
TRUE NEWBIE

this may be a lame way to do it but its the only way i found to work, put a link to it in your statup folder, it will load all the time. its not the best but it works

Hello dipeshrestha !

When SoftICE is loaded in AUTOEXEC.BAT, it runs WIN.COM itself which starts Windows. So any lines after the call to SoftICE won't be processed ever.

Didn't know S-Ice started win.com...
That clears up certain mysteries... tks...

i didnt know it did either

I dont know that softice run win.com. so i have to load icedump from startup.

thanx to all.

dipeshrestha

Hi guys,

You should dig out +Spath's Softice Internals (not sure if it's in the ID-rip archive, was on Crackz anyway), it's a great read on how SI loads up and works.

"17. load and execute WIN.COM"

regards,
Kayaker

Installing IceDUMP:
-------------------
Extract the ZIP file (32bit with dirs.).
It is not important where to Extract IceDUMP.
Once extracted, should see Dirs:
TOOLS / W9X / WNT
| | +--------------------> WinNT VxD versions of SoftICE
| +---------------+
MASM include files |
|
SoftICE win9X versions (Dos as well)
In this dir you should see allot of Dirs
Every dir represents SoftICE version,
Starting from DOS->Windows SoftICE versions.
Also there are some other Dirs for small
Utile (mp3 player..)

The first thing you do before running the IceDUMP exe file (VxD)
Is to ensure your SoftICE version, you can do that by loading SoftICEAnd press VER
You will be given The SoftICE information.
For example, my SoftICE version is:

SoftICE 4.0.5 (Build 334)
Copyright (c) 2000 Compuware Corporation. All rights reserved

This means i have SoftICE 4.05 Build 334)
So I Run SoftICE for Windows98, so in IceDUMP Dirs for w9x
I need to enter the sub dir called: 4.05.334
And load the specific VxD for my SoftICE version.
*You don't need to put IceDUMP files in SoftICE directory.

My IceDUMP is installed at: D:\Dont Tuch\MyDucoments\Cracking\Ice Dump\w9x
Where SoftIce is installed at: C:\Program Files\NuMega\SoftIce95
You see, there is no need to move any files, when running the right IceDUMP VxD
Version for your SoftICE it will automatically patched in memory and be ready to use.
And you can use more options IceDUMP have :-)

Have Fun.

p.s:

there is a new version of iceDump, so u should grasp it :-)

Hi all

good discussion over here. I am also facing some problem with my s-ice. I cannot use my mouse while i am inside the soft ice. i have installed mouse.drv in softice initialization settings. but it doesnot work.


please help me.

npcracker

Hi,

i have installed mouse.drv in softice initialization settings. but it doesnot work.

well, open sice's mouse driver setup, and choose ur type or mouse, mostly old mouses will work in Com-2 , new mouses with PS2 ...
although when using mouse in sice, i dont recommend with the Wheel onto of it , cuz it goes crazy in Sice
cya later

Hi bengaly

i have done what ever u had said to me . but the damn mice is not moving in sice
please help

Heya npcracker,

check or tick or choose ;p ps2 mouse,and Microsft intellimouse
and restart softice might help .

To bengaly,
old mouse uses serial port which is com1 not com2

Remember softice does not support a USB mouse. I use the PS2 convert on my shit MS mouse, and the wheel does go funny, sometimes =)

ThrawN

Hi all


after all my mouse still is not moving in the sice. i have done whatever u had said but..............

npcracker needs help

hi npcracker

try this in S-ICE type Set Mouse on

see if that will get you going

Hi all,

I am facing odd problem over here. i have searched forums for my problem but cant find one. So i am going to revive this old thread ;-). Actually after formatting my HDD, i installed sice 4.01 under w98se. after that i tried to load icedump. but icedump cannot be loaded. i tried all version of icedump but doesnt load. it runs well before i format by HDD. I cannot figure out what the problem is. So can anyone guide me with that?

dipeshrestha

sometimes quick reinstall will solve the problem. ;-). i reinstalled sice and prob solved

It is usually a good first step to try to resolve problems, particularly on a freshly formatted HD.

Regards.

Hi JMI,

When i saw your reply, i am quite sure that you must have said "Use Search Button on top" or "paste some link to threadid".... . Anyway it was not the case this time. Hope you wont mind...


dipeshrestha

Actually, I was responding to your statement of: "i reinstalled sice and prob solved". Since you had re-installed it on a clean HD, it should have worked, unless something glitched. Re-re-installing usually resolves such issues, since there shouldn't have been anything preventing it from working correctly.

Regards,