ADC12048  Product Folder

Operating from a single 5V power supply, the ADC12048 is a 12 bit + sign, parallel I/O, self-calibrating, sampling analog-to-digital converter (ADC) with an eight input fully differential analog multiplexer. The maximum sampling rate is 216 kHz. On request, the ADC goes through a self-calibration process that adjusts linearity, zero and full-scale errors.

The ADC12048's 8-channel multiplexer is software programmable to operate in a variety of combinations of single-ended, differential, or pseudo-differential modes. The fully differential MUX and the 12-bit + sign ADC allows for the difference between two signals to be digitized.

The ADC12048 can be configured to work with many popular microprocessors/microcontrollers and DSPs including National's HPC family, Intel386 and 8051, TMS320C25, Motorola MC68HC11/16, Hitachi 64180 and Analog Devices ADSP21xx.

For complementary voltage references see the LM4040, LM4041 or LM9140.

• 8-channel programmable Differential or Single-Ended multiplexer
• Programmable Acquisition Times and user-controllable Throughput Rates
• Programmable data bus width (8/13 bits)
• Built-in Sample-and-Hold
• Programmable Auto-Calibration and Auto-Zero cycles
• Low power standby mode
• No missing codes

(f_CLK = 12 MHz)

• Power consumption

• Normal operation

  34 mW, max

• Stand-by mode

  75 µw, max

• Medical instrumentation
• Process control systems
• Test equipment
• Data logging
• Inertial guidance