ADC12130  Product Folder

The ADC12130, ADC12132 and ADC12138 are 12-bit plus sign successive approximation A/D converters with serial I/O and configurable input multiplexer. The ADC12132 and ADC12138 have a 2 and an 8 channel multiplexer, respectively. The differential multiplexer outputs and A/D inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12130 has a two channel multiplexer with the multiplexer outputs and A/D inputs internally connected. The ADC12130 family is tested with a 5 MHz clock. On request, these A/Ds go through a self calibration process that adjusts linearity, zero and full-scale errors to typically less than ±1 LSB each.

The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +5V) can be accommodated with a single +5V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign output data format.

The serial I/O is configured to comply with the NSC MICROWIRE™. For voltage references, see the LM4040 or LM4041.

• Serial I/O (MICROWIRE, SPI and QSPI Compatible)
• 2 or 8 channel differential or single-ended multiplexer
• Analog input sample/hold function
• Power down mode
• Programmable acquisition time
• Variable digital output word length and format
• No zero or full scale adjustment required
• 0V to 5V analog input range with single 5V power supply

• Resolution: 12-bit plus sign
• 12-bit plus sign conversion time: 8.8 µs (max)
• 12-bit plus sign throughput time: 14 µs (max)
• Integral linearity error: ±2 LSB (max)
• Single supply: 3.3V or 5V ±10%
• Power consumption

  3.3V	15 mW (max)
  3.3V power down	40 µW (typ)
  5V	33 mW (max)
  5V power down	100 µW (typ)

• Pen-based computers
• Digitizers
• Global positioning systems