ADCV08832  Product Folder

The ADCV08832 is a low voltage, 8-Bit successive approximation analog-to-digital converter with a 3-wire serial interface. The serial I/O will interface to microcontrollers, PLD's, microprocessors, DSPs or shift registers. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard.

To minimize total power consumption, the ADCV08832 can be set to go into low power mode whenever it is not performing conversions.

A sample/hold function allows the analog voltage at the positive input to vary during the actual A/D conversion. The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes.

• 3-wire serial digital data link requires few I/O pins
• Single supply 2.7V to 5V
• Analog input track/hold function
• Analog input voltage range from GND to V_CC
• No zero or full scale adjustment required
• TTL/CMOS input/output compatible
• Superior pin compatible replacement for TLV0832 and ADC0832

(For 3.3V supply, typical, unless otherwise noted)

• Digitizing sensors and waveforms
• Process control monitoring
• Remote sensing in noisy environments
• Instrumentation
• Embedded systems
• Low power circuits