COP8AME9  Product Folder

The COP8AME9/ANE9 Flash microcontrollers are highly integrated COP8™ Feature core devices, with 8k Flash memory and advanced features including Virtual EEPROM, dual Op Amps (one programmable gain), temperature sensor, A/D, High Speed Timers, USART, and Brownout Reset. The COP8AME9/ANE9 have True In-System Programmable Flash memory with high-endurance (100k erase/write cycles), and are well suited for applications requiring real-time data collection and processing, multiple sensory interface, and remote monitoring. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.

Device included in this datasheet:

KEY FEATURES

• 8 kbytes Flash Program Memory with High Security
• 512 bytes SRAM
• 10-bit Successive Approximation Analog to Digital Converter (up to 6 external channels)
• Op Amps Specification:
  • One programmable gain (1, 2, 5, 10, 20, 49, 98) with adjustable offset voltage nulling
  • One general purpose with all I/O terminals accessible
  • 1 MHz GBW
  • Low offset voltage
  • High input impedance
  • Rail-to-rail input/output
• Temperature Sensing Diode
• True In-System Programmability of Flash Memory with 100k erase/write cycles
• Dual Clock Operation providing Enhanced Power Save Modes - HALT/IDLE
• 100% Precise Analog Emulation
• Single supply operation: 4.5V-5.5V
• Three 16-bit timers:
  • Timers T2 and T3 can operate at 50 ns resolution
  • Processor Independent PWM mode
  • External Event counter mode
  • Input Capture mode
• Brownout Reset (COP8AME9)
• 20 high-sink current I/Os
• USART
• Virtual EEPROM using Flash Program Memory
• 7 input analog MUX with selectable output destination

OTHER FEATURES

• Quiet Design (low radiated emissions)
• Multi-Input Wake-up with optional interrupts
• MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
• Clock Doubler for 20 MHz operation from 10 MHz Oscillator
• Thirteen multi-source vectored interrupts servicing:
  • External Interrupt
  • USART (2)
  • Idle Timer T0
  • Three Timers (each with 2 interrupts)
  • MICROWIRE/PLUS Serial peripheral interface
  • Multi-Input Wake-Up
  • Software Trap
• Idle Timer with programmable interrupt interval
• 8-bit Stack Pointer SP (stack in RAM)
• Two 8-bit Register Indirect Data Memory Pointers
• True bit manipulation
• WATCHDOG and Clock Monitor logic
• Software selectable I/O options
  • TRI-STATE Output/High Impedance Input
  • Push-Pull Output
  • Weak Pull Up Input
• Schmitt trigger inputs on I/O ports
• Temperature range: -40°C to +85°C, -40°C to +125°C
• Packaging: 28 DIP, and 28 SOIC