COP8SDE9  Product Folder

The COP8SBE9/SCE9/SDE9 Flash microcontrollers are highly integrated COP8™ Feature core devices, with 8k Flash memory and advanced features including Virtual EEPROM, High Speed Timers, USART, and Brownout Reset. This single-chip CMOS device is suited for applications requiring a full featured, in-system reprogrammable controller with large memory and low EMI. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.

Devices included in this datasheet:

KEY FEATURES

• 8k bytes Flash Program Memory with Security Feature
• Virtual EEPROM using Flash Program Memory
• 256byte volatile RAM
• USART with onchip baud generator
• 2.7V - 5.5V In-System Programmability of Flash
• High endurance -100k Read/Write Cycles
• Superior Data Retention - 100 years
• Dual Clock Operation with HALT/IDLE Power Save Modes
• Two 16-bit timers:
  • Timer T2 can operate at high speed (50 ns resolution)
  • Processor Independent PWM mode
  • External Event counter mode
  • Input Capture mode
• Brown-out Reset (COP8SBE9/SCE9)
• High Current I/Os
  • B0 - B3: 10 mA @ 0.3V
  • All others: 10 mA @ 1.0V

OTHER FEATURES

• Single supply operation:
  • 2.7V-5.5V (0°C to +70°C)
  • 4.5V-5.5V (-40°C to +125°C)
• Quiet Design (low radiated emissions)
• Multi-Input Wake-up with optional interrupts
• MICROWIRE/PLUS (Serial Peripheral Interface Compatible)
• Clock Doubler for 20 MHz operation from 10 MHz Oscillator, with 0.5 µs Instruction Cycle
• Eleven multi-source vectored interrupts servicing:
  • External Interrupt
  • USART (2)
  • Idle Timer T0
  • Two Timers (each with 2 interrupts)
  • MICROWIRE/PLUS Serial peripheral interface
  • Multi-Input Wake-up
  • Software Trap
• Idle Timer with programmable interrupt interval
• 8-bit Stack Pointer SP (stack in RAM)
• Two 8-bit Register Indirect Data Memory Pointers
• True bit manipulation
• WATCHDOG and Clock Monitor logic
• Software selectable I/O options
  • TRI-STATE Output/High Impedance Input
  • Push-Pull Output
  • Weak Pull Up Input
• Schmitt trigger inputs on I/O ports
• Temperature range: 0°C to +70°C and -40°C to +125°C (COP8SCE9/SDE9)
• Packaging: 44 PLCC, 44 LLP and 48 TSSOP