HOME HOME SELECT DESIGN BUY EXPLORE About Us Support My Profile Search

 Products > Analog - Regulators > SwitchingRegulators > LM5642

LM5642  Product Folder

High Voltage, Dual Synchronous Buck Converter with Oscillator Synchronization
  

See Also:
  
LM2647 - DUAL SYNCHRONOUS BUCK CONTROLLER WITH OUTPUT VOLTAGES AS LOW AS 0.6V
Generic P/N 5642
General
Description
Features Datasheet Package
& Models
Samples
& Pricing
Reliability
Metrics
Design
Tools
Application
Notes

Parametric Table Parametric Table
Temperature Min (deg C) -40 
Temperature Max (deg C) 125 
Multiple Output Capability Yes 
On/Off Pin No 
Error Flag No 
InputMin Voltage (Volt) 4.50 
InputMax Voltage (Volt) 36 
Output Current (mA)
Output Voltage (Volt)
Adjustable Output Yes 
Output Range 1.3V to 90% Vin 
Switching Frequency (Hz) 250000 
Adj Switch Frequency Yes 
Sync Pin Yes 
Efficiency (%)
Flyback No 
Inverting No 
Step-Up No 
Step-Down Yes 
RegType Switching Regulator 

Datasheet

TitleSize in KbytesDate
View Online

Download

Receive via Email
LM5642 High Voltage, Dual Synchronous Buck Converter with Oscillator Synchronization 667 Kbytes 2-Sep-03 View Online Download Receive via Email

If you have trouble printing or viewing PDF file(s), see Printing Problems.

Package Availability, Models, Samples & Pricing

Part NumberPackageStatusModelsSamples &
Electronic
Orders
Budgetary PricingStd
Pack
Size
Package
Marking
TypePinsMSL/Lead-Free AvailabilityLead
Time
QtySPICEIBISQty$US each
LM5642EVAL-KITevaluation boardFull productionN/AN/A 1+$120.001-
6-8 weeks0
LM5642MTCTSSOP28StatusFull productionN/AN/A24 Hour Samples
Buy Now
1K+$1.85rail
of
48
NSUZXYTT
LM5642
MTC
10-12 weeks50000
LM5642MTCXTSSOP28StatusFull productionN/AN/A 
Buy Now
1K+$1.85reel
of
2500
NSUZXYTT
LM5642
MTC
10-12 weeks50000

General Description

The LM5642 consists of two current mode synchronous buck regulator controllers operating 180° out of phase with each other at a normal switching frequency of 200kHz.

Out of phase operation reduces the input ripple RMS current, thereby significantly reducing the required input capacitance. The switching frequency can be synchronized to an external clock between 150kHz and 250kHz. The two switching regulator outputs can also be paralleled to operate as a dual-phase single output regulator.

The output of each channel can be independently adjusted from 1.3 to 90% of Vin. An internal 5V rail is also available externally for driving bootstrap circuitry.

Current-mode feedback control assures excellent line and load regulation and a wide loop bandwidth for excellent response to fast load transients. Current is sensed across either the Vds of the top FET or across an external current-sense resistor connected in series with the drain of the top FET.

The LM5642 features analog soft-start circuitry that is independent of the output load and output capacitance making the soft-start behavior more predictable and controllable than traditional soft-start circuits.

Over-voltage protection is available for both outputs. A UV-Delay pin is also available to allow delayed shut off time for the IC during an output under-voltage event.

Features

  • Two synchronous buck regulators
  • 180° out of phase operation
  • Synchronizable switching frequency from 150kHz to 250kHz
  • 4.5V to 36V input range
  • 50µA Shutdown current
  • Adjustable output from 1.3V to 90% of Vin
  • 0.04% (typical) line and load regulation error
  • Current mode control with or without a sense resistor
  • Independent enable/soft-start pins allow simple sequential startup configuration.
  • Configurable for single output parallel operation. (See )
  • Adjustable cycle-by-cycle current limit
  • Input under-voltage lockout
  • Output over-voltage latch protection
  • Output under-voltage protection with delay
  • Thermal shutdown
  • Self discharge of output capacitors when the regulator is OFF
  • TSSOP package

Applications

  • Embedded Computer Systems
  • Telecom Systems
  • Set-Top Boxes
  • WebPAD
  • Point Of Load Power Architectures

Reliability Metrics

Part Number Process Early Failure Rate - Rejects Sample Size (EFR) PPM * Rel. Rejects Device Hours Long Term Failure Rates (FITS) MTTF
LM5642MTCABCD15001020000924003926125054
LM5642MTCXABCD15001020000924003926125054

For more information on Reliablitity Metrics, please click here.


Design Tools

TitleSize in KbytesDate
View Online

Download

Receive via Email
Design Of A Buck Switching Power Supply with the LM5642 Current Mode Dual Synchronous Converter 2 Kbytes 30-Sep-2003 View    

If you have trouble printing or viewing PDF file(s), see Printing Problems.

Application Notes

TitleSize in KbytesDate
View Online

Download

Receive via Email
AN-1149: Application Note 1149 Layout Guidelines for Switching Power Supplies 113 Kbytes 26-Sep-02 View Online Download Receive via Email
AN-1197: Application Note 1197 Selecting Inductors for Buck Converters 371 Kbytes 1-Oct-02 View Online Download Receive via Email
AN-1246: Application Note 1246 Stresses in Wide Input DC-DC Converters 272 Kbytes 26-Sep-02 View Online Download Receive via Email
AN-1292: Application Note 1292 LM5642 Evaluation Board 2111 Kbytes 2-Sep-03 View Online Download Receive via Email
AN-556: Application Note 556 Introduction to Power Supplies 159 Kbytes 25-Sep-02 View Online Download Receive via Email
AN-558: Introduction to Power MOSFETs and Their Applications 258 Kbytes 10-Jun-96 View Online Download Receive via Email

If you have trouble printing or viewing PDF file(s), see Printing Problems.

[Information as of 15-Jan-2004]