LM6134  Product Folder

The LM6132/34 provides new levels of speed vs power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.

The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.

Operating on supplies from 2.7V to over 24V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.

(For 5V Supply, Typ Unless Noted)

• Rail-to-Rail input CMVR -0.25V to 5.25V
• Rail-to-Rail output swing 0.01V to 4.99V
• High gain-bandwidth, 10 MHz at 20 kHz
• Slew rate 12 V/µs
• Low supply current 360 µA/Amp
• Wide supply range 2.7V to over 24V
• CMRR 100 dB
• Gain 100 dB with R_L = 10k
• PSRR 82 dB

• Battery operated instrumentation
• Instrumentation Amplifiers
• Portable scanners
• Wireless communications
• Flat panel display driver