LP339  Product Folder

The LP339 consists of four independent voltage comparators designed specifically to operate from a single power supply and draw typically 60 µA of power supply drain current over a wide range of power supply voltages. Operation from split supplies is also possible and the ultra-low power supply drain current is independent of the power supply voltage. These comparators also feature a common-mode range which includes ground, even when operated from a single supply.

Applications include limit comparators, simple analog-to-digital converters, pulse, square and time delay generators; VCO's; multivibrators; high voltage logic gates. The LP339 was specifically designed to interface with the CMOS logic family. The ultra-low supply current makes the LP339 valuable in battery powered applications.

• Ultra-low power supply current drain (60 µA)-independent of the supply voltage (75 µW/comparator at +5 V_DC)
• Low input biasing current: 3 nA
• Low input offset current: ±0.5 nA
• Low input offset voltage: ±2 mV
• Input common-mode voltage includes ground
• Output voltage compatible with MOS and CMOS logic
• High output sink current capability (30 mA at V_O=2 V_DC)
• Supply Input protected against reverse voltages

• Ultra-low power supply drain suitable for battery applications
• Single supply operation
• Sensing at ground
• Compatible with CMOS logic family
• Pin-out identical to LM339