LP3871  Product Folder

The LP3871/LP3874 series of fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V input supply. Wide range of preset output voltage options are available. These ultra low dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low voltage microprocessor applications. The LP3871/LP3874 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3871/LP3874 to operate under extremely low dropout conditions.

Dropout Voltage: Ultra low dropout voltage; typically 24mV at 80mA load current and 240mV at 0.8A load current.

Ground Pin Current: Typically 6mA at 0.8A load current.

Shutdown Mode: Typically 10nA quiescent current when the shutdown pin is pulled low.

Error# Flag: Error# flag goes low when the output voltage drops 10% below nominal value.

SENSE: Sense pin improves regulation at remote loads.

Precision Output Voltage: Multiple output voltage options are available ranging from 1.8V to 5.0V with a guaranteed accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).

• Ultra low dropout voltage
• Low ground pin current
• Load regulation of 0.04%
• 10nA quiescent current in shutdown mode
• Guaranteed output current of 0.8A DC
• Available in TO-263 and TO-220 packages
• Output voltage accuracy ± 1.5%
• Error# flag indicates output status
• Sense option improves load regulation
• Minimum output capacitor requirements
• Overtemperature/overcurrent protection
• -40°C to +125°C junction temperature range

• Microprocessor power supplies
• GTL, GTL+, BTL, and SSTL bus terminators
• Power supplies for DSPs
• SCSI terminator
• Post regulators
• High efficiency linear regulators
• Battery chargers
• Other battery powered applications