SCAN92LV090  Product Folder

The SCAN92LV090A is one in a series of Bus LVDS transceivers designed specifically for the high speed, low power proprietary backplane or cable interfaces. The device operates from a single 3.3V power supply and includes nine differential line drivers and nine receivers. To minimize bus loading, the driver outputs and receiver inputs are internally connected. The separate I/O of the logic side allows for loop back support. The device also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector.

The driver translates 3V TTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation, while consuming minimal power with reduced EMI. In addition, the differential signaling provides common mode noise rejection of ±1V.

The receiver threshold is less than ±100 mV over a ±1V common mode range and translates the differential Bus LVDS to standard (TTL/CMOS) levels.

This device is compliant with IEEE 1149.1 Standard Test Access Port and Boundary Scan Architecture with the incorporation of the defined boundary-scan test logic and test access port consisting of Test Data Input (TDI), Test Data Out (TDO), Test Mode Select (TMS), Test Clock (TCK), and the optional Test Reset (TRST#).

• IEEE 1149.1 (JTAG) Compliant
• Bus LVDS Signaling
• Low power CMOS design
• High Signaling Rate Capability (above 100 Mbps)
• 0.1V to 2.3V Common Mode Range for V_ID = 200mV
• ±100 mV Receiver Sensitivity
• Supports open and terminated failsafe on port pins
• 3.3V operation
• Glitch free power up/down (Driver & Receiver disabled)
• Light Bus Loading (5 pF typical) per Bus LVDS load
• Designed for Double Termination Applications
• Balanced Output Impedance
• Product offered in 64 pin LQFP package and BGA package
• High impedance Bus pins on power off (V_CC = 0V)