ADC0802  Product Folder

The ADC0801, ADC0802, ADC0803, ADC0804 and ADC0805 are CMOS 8-bit successive approximation A/D converters that use a differential potentiometric ladder-similar to the 256R products. These converters are designed to allow operation with the NSC800 and INS8080A derivative control bus with TRI-STATE output latches directly driving the data bus. These A/Ds appear like memory locations or I/O ports to the microprocessor and no interfacing logic is needed.

Differential analog voltage inputs allow increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.

• Compatible with 8080 µP derivatives-no interfacing logic needed - access time - 135 ns
• Easy interface to all microprocessors, or operates "stand alone"

• Differential analog voltage inputs
• Logic inputs and outputs meet both MOS and TTL voltage level specifications
• Works with 2.5V (LM336) voltage reference
• On-chip clock generator
• 0V to 5V analog input voltage range with single 5V supply
• No zero adjust required
• 0.3[Prime] standard width 20-pin DIP package
• 20-pin molded chip carrier or small outline package
• Operates ratiometrically or with 5 V_DC, 2.5 V_DC, or analog span adjusted voltage reference