CLC414  Product Folder

The CLC414 is a low power, quad, monolithic operational amplifier designed for intermediate gain applications where power and cost per channel are of primary concern. Benefiting from National's current feedback architecture, the CLC414 offers a gain range of ±1 to ±10 while providing stable, oscillation free operation without external compensation, even at unity gain.

Operating from ±5V supplies, the CLC414 consumes only 25mW of power per channel, yet maintains a 90MHz small signal bandwidth and a 1000V/µs slew rate. The CLC414 also provides wide channel isolation with its 70dB crosstalk (input referred at 5MHz). Applications requiring a high density solution to high speed amplification such as active filters and instrumentation diff amps will benefit from the CLC414's four integrated, wideband op amps in one 14-pin package.

Commercial remote sensing applications and battery powered radio transceivers requiring high performance, low power will find the CLC414 to be an attractive, cost effective solution. In composite video switching and distribution applications, the CLC414 offers differential gain and phase performance of 0.1%, 0.12° at 3.58MHz.

The lower power CLC414 and the wideband CLC415 are quad versions of the CLC406. Both of these quads afford the designer lower power consumption and lower cost per channel with the additional benefit of requiring less board space per amplifier.

Construction using an advanced, complementary bipolar process and National's proven current feedback architecture, the CLC414 is available in several versions to meet a variety of requirements.

Enhanced Solutions (Military/Aerospace)

SMD Number: 5962-91693

Space level versions also available.

For more information, visit http://www.national.com/mil

• 90MHz small signal bandwidth
• 2mA quiescent current per amplifier
• 70dB channel isolation @ 5MHz
• 0.1%/0.12° differential gain/phase
• 16ns settling to 0.1%
• 100V/µs slew rate
• 3.3ns rise and fall time (2V_PP)
• 70mA output current

• Composite video distribution amps
• HDTV amplifiers
• RGB video amplifiers
• CCD signal processing
• Active filters
• Instrumentation diff. amps
• General purpose high density requirements