DS92LV222A  Product Folder

The is a repeater designed specifically for the bridging of multiple backplanes in a rack. The utilizes low voltage differential signaling to deliver high speed while consuming minimal power with reduced EMI. The RSEL pin and DE pins allow maximum flexibility as to which receiver/driver are used. The repeats signals between backplanes and accepts or drives signals onto the local bus. It also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector.

The driver is selectable between 3.5 mA (100Ohm load) and 8.5 mA (27Ohm load) output loop currents depending upon the level applied to the ISEL pin. This allows for single termination (point-to-point) and also double termination (multipoint) applications while maintain similar differential levels.

The receiver threshold is ±100 mV, while providing ±1V common mode range.

• Bus LVDS Signaling (BLVDS)
• Designed for Double Termination Applications
• Low power CMOS design
• High Signaling Rate Capability (above 100 Mbps)
• Ultra Low Power Dissipation (13.2 mW quiescent)
• Balanced Output Impedance
• Lite Bus Loading 5 pF typical
• Selectable Drive Capability (3.5 mA or 8.5 mA)
• 3.3V operation
• ±1V Common Mode Range
• ±100 mV Receiver Sensitivity
• Available in 16 pin SOIC package.