View Online
Download
Receive via Email
DS9622 Product Folder |
|---|
| |||
|---|---|---|---|
| General Description |
Features | Datasheet | Package & Models |
Samples & Pricing |
| Title | Size in Kbytes | Date | View Online |
Download |
Receive via Email |
|---|---|---|---|---|---|
| DS9622 Dual Line Receiver | 199 Kbytes | 15-Jun-99 | View Online | Download | Receive via Email |
| DS9622 Mil-Aero Datasheet MNDS9622-X | 200 Kbytes | View Online | Download | Receive via Email |
|
If you have trouble printing or viewing PDF file(s), see Printing Problems. |
| Part Number | Package | Status | Models | Samples & Electronic Orders | Budgetary Pricing | Std Pack Size | Package Marking | |||||
| Type | Pins | MSL/Lead-Free Availability | Lead Time | Qty | SPICE | IBIS | Qty | $US each | ||||
| 5962-87522012A | LCC | 20 | Status | Lifetime buy | N/A | N/A |  | 50+ | $25.00 | rail of 50 | NS > ZSSXXYYA DS9622ME/ 883QL 5962- 87522012A | |
| 8-10 weeks | 500 | |||||||||||
| 5962-8752201CA | CERDIP | 14 | Status | Lifetime buy | N/A | N/A | 50+ | $16.00 | rail of 25 | NSZSSXXYYA> DS9622MJ/883QL 5962-8752201CA | ||
| 6-8 weeks | 500 | |||||||||||
| Obsolete Part | Alternate Part or Supplier | Source | Last Time Buy Date |
|---|---|---|---|
| DS9622ME/883 | NA | 5962-87522012A | 12/01/2004 |
| DS9622MJ/883 | NA | 5962-8752201CA | 12/01/2004 |
| DS9622MW/883 | DS9622MJ/883 | NATIONAL SEMICONDUCTOR | 09/08/98 |
The DS9622 is a dual line receiver designed to discriminate a worst case logic swing of 2V from a ±10V common mode noise signal or ground shift. A 1.5V threshold is built into the differential amplifier to offer a TTL compatible threshold voltage and maximum noise immunity. The offset is obtained by use of current sources and matched resistors. The DS9622 allows the choice of output states with the input open, without affecting circuit performance by use of S3. A 130 Ohm terminating resistor is provided at the input of each line receiver. An enable is also provided for each line receiver. The output is TTL compatible. The output high level can be increased to 12V by tying it to a positive supply through a resistor. The output circuits allow wired-OR operation. |
|
 |
Website Guide • About "Cookies" • National is QS 9000 Certified • Privacy/Security Statement • Contact Us/Feedback Site Terms & Conditions of Use • Copyright 2003© National Semiconductor Corporation |