HP 8510C Microwave Network Analyzer Family

Product Summary

The HP 8510C microwave vector network analyzer family provides complete solutions for characterizing the linear behavior of either active or passive networks over the 45 MHz to 110 GHz frequency range. A complete system consists of the HP 8510C network analyzer, an S-parameter test set, and a compatible RF source. Fully integrated systems are available. They are tested and verified at the factory prior to shipment and come with a one-year, on-site warranty.

The HP 8510C displays measurement results in log/linear magnitude, phase, or group delay format on a large, color CRT with two independent, yet identical channels. The impact of systematic errors is removed by virtually "real-time" error correction, allowing you to adjust your test device while it's being measured. Effective directivity and source match can be improved to as much as 60 dB.

The HP 85161B software leads the operator one step at a time, from setup and calibration to hardcopy results.

Related product datasheets available online:

HP 8510E Microwave Network Analyzer
HP 8510SX Microwave Network Analyzer
HP 85107B Microwave Network Analyzer, 45 MHz to 50 GHz
HP 85106C Millimeter-Wave Network Analyzer Subsystem (33 GHz to 110 GHz)
HP 85108A Pulsed-RF Network Analyzer System (2 to 20 GHz)
HP 85108L Pulsed-RF Network Analyzer System (45 MHz to 2 GHz)
HP 85109C Network Analyzer System (45 MHz to 75 or 110 GHz)

Product Features

• 45 MHz to 110 GHz frequency range
• Real-time error-corrected measurements
• 60 dB effective directivity and source match
• Up to 100 dB dynamic range
• 0.001 dB, 0.01 degree, 0.01 ns measurement resolution
• Optional time domain and pulsed RF measurement capability

Product Specifications

Performance depends on system configuration.  
(See individual product pages)

Product Ordering Information

The following is partial ordering information only.  Complete 
ordering information for preconfigured systems and individual 
components may be found in the HP 8510C Family Network Analyzer 
Configuration Guide, p/n 5091-8967E.

HP 8510C	Network Analyzer
   Opt 008	Pulsed-RF Measurement Capability
   Opt 010	Time Domain Capability

HP 851X	Test Set -- one of the following test sets is required:

HP 8511A	S-parameter test set
HP 8511B	S-parameter test set
HP 8514B	S-parameter test set (45 MHz to 20 GHz)
HP 8515A	S-parameter test set (45 MHz to 26.5 GHz)
HP 8517B	S-parameter test set (45 MHz to 50 GHz)
HP 85110A	S-parameter test set (2 GHz to 20 GHz)
HP 85110L	S-parameter test set (45 MHz to 2 GHz

HP 8360	Series Synthesized Sweeper or HP 8350B Sweeper with RF Plug-in

To help you make the right instrument choices

Your Field Sales Engineer is ready to answer your questions about specifications, applications and ordering. Find your Field Sales Engineer at your Local Sales Office.

[Hewlett-Packard] [Test & Measurement] [Product Information] [Model Number Index]

Contact HP Test & Measurement. (c) Copyright 1994, 1995, 1996, 1997 Hewlett-Packard Company.

Page Updated: Thursday June 19 16:08:22 UTC 1997